Invicta ELO L Notice Particulière D'utilisation Et D'installation page 17

Output Regulator:
-
The output regulator, situated on the front of the stove, is used to vary output:
- "Lighting" position:
- Moving over to "Slow Combustion":
CONNECTION OF THE AIR SUPPLY
At the rear of the
stove
Ø 80 connection hose
XD, le 13/02/2020
ELO L Wood Stove
Maximum position - handle against
the end stop
Moving the regulator over to the
left should result in a noticeable
reduction in activity.
Slow combustion position
The stove is designed to be installed in LEB (Low Energy) buildings. The air supply is completely
sealed (Ø 80 hose) and is supplied directly with air from outside rather than from within the room. It is
compatible with double flow and humidity-sensitive CMV (Controlled Mechanical Ventilation)
systems.
- "Normal output" position:
Reference : P610244 vers.1.1
Normal output position - align the
mark on the regulator with the door
Page 17 sur 20