Cleaning And Care - oneConcept CTR1 Mode D'emploi

8-2. If you find that the air after Step 1) is still not cool enough, you can add additional ice block
into the water tank directly by opening the water tank cover. Be sure not to exceed the icebox
capacity otherwise damage to the unit or electric shock may occur.
8-3. If you wish to use an Ice box instead of ice block, just place it directly into the tank by ope-
ning the water door. It will be good cooling efficiency if you place it in your refrigerator and let the
ice pack freeze for 1 to 2 hours.
8-4. You may complete pull out water tank, then replace water in the water tank or clean water
tank.
8-5. Under the cooling work condition, the appliance will delay 5 minutes to stop working when
you shut off the unit or timing finished, during the extended period, the timer pilot lamp is flashed.
9. 9. ION button: To gain fresh air in your room, just press ION button and the build-in ionizer will
operate.
10. SAVE ENEGER button: Press the „SAVE „ button once TO shut or open all indicators.
11. The function of above item can be carried out with your remote control by pressing the corres-
ponding function button. The remote control can work with a distance of within 5 meters and an
angle about 20 degrees.
12. How to knock down the dust-proof bracket and honeycomb filter
13. To turn off the unit just press the button OFF.
14. To completely shut the unit off, turn all the controls to OFF, and remove plug from the socket-
outlet.
General Hints on Cleanning
• Always remove the plug from the socket-outlet and allow the fan blower to stop acting before clean it.
• Clean the external surfaces of the unit with a soft damp (not dripping wet) cloth.

Cleaning and Care

10