Important Safety Instructions - Teknofun 811 254 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4

Important safety instructions:

1. Read instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain instructions - The safety and operating instructions should be retained for future reference.
3. Warnings - All warnings and cautions on the appliance and in the operating instructions should be adhered to.
4. Follow instructions - All operating and use instructions should be followed.
5. Water and Moisture - The product should not be used near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement, or near a swimming pool or the like, during the battery is in charge.
6. Ventilation - The product should be situated in the location or position which does not interfere with its proper ventilation. For
example, the product should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings, or placed
in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air through the ventilation openings.
7. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
8. Power Sources - The product should be operated only with the type of power supply indicated on the marking label. If you are
not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operation instructions.
9. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit
from the appliance.
10. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
11. Not in use periods - The power cord of the product should be unplugged from the outlet when left or not use for a long period of
time.
12. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the product case
through product openings.
13. Damage for repairing - Unplug this product from the wall outlet and take it to qualified service personnel under the following
conditions.
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled into, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate when used according to the operating instructions, adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may interfere with the product's normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance-this indicates a need for service.
14. Servicing - The user should not attempt to service the product beyond that described in the operating instruction. All servicing
should be referred to qualified service personnel.
15. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
16. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long
period of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product
due to lightning and power-line surges.
17. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in proper operation condition.
18. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of
fire or electric shock.
19. In case of malfunction due to electrostatic discharge, just reset the product (reconnection of power source may be required) to
resume normal operation
20. The AC/DC adaptor and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as
vases, shall be placed on the product.
21. "To be completely disconnect the power input, the AC/DC adaptor of apparatus shall be disconnected from the mains" as the
disconnect devices is the AC/DC adaptor of apparatus.
22. The AC/DC adaptor and apparatus should not be obstructed OR should be easily accessed during intended use.
23. Battery shall not be exposed to excessive heat such as sunshine, fire or the like,
24. Minimum distances 5 cm around the apparatus for sufficient ventilations.
25. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, table-clothes,
curtains etc.
26. No naked flame sources such as lighted candles should be placed on the apparatus.
27. Attention should be drawn to the environmental aspects of battery disposal.
28. Use this product in moderate climates.
29. Use manufacturer approved batteries, chargers, accessories and supplies.
30. Do not touch the device with wet hands.
31. Do not drop or cause and impact to the charger or the device.
32. Do not allow children or animals to chew or suck the device.
33. Do not disassemble, modify or repair your device.
34. Magnetic stripe cards, including credit cards, phone cards, passbooks, and boarding passes may be damaged by magnetic
fields.
2

Publicité

Table des Matières
loading

Table des Matières