Graco Family Listen 'n Talk Plus 2780 Manuel D'utilisateur page 9

Operation
To Listen To Baby
• Turn on Nursery Unit using the Volume ON/OFF switch.
• Turn on one or both Parent Units using the Volume ON/OFF switch.
To Speak to Baby
• Turn on Nursery Unit using the Volume ON/OFF switch.
• Turn on one or both Parent Units using the Volume ON/OFF switch.
• On one Parent's Unit, press and hold the Push-To-Talk-Baby "B" Button. Parent's Unit is
ready to transmit when green power light blinks once. (If green light does not blink, you will
not transmit to Nursery Unit. Refer to Solving Problems on page 10.)
• Speak into Parent's Unit holding unit 12"-24" from your mouth. Holding unit closer will cause
the sound to be distorted.
• Release button when finished speaking.
NOTE: When one Parent's Unit is transmitting to the Nursery Monitor, neither Parent Unit will
receive from the Nursery Unit. The Parent's Unit NOT transmitting to the baby will not receive
the Parent's Unit transmitting to the baby.
To Speak to Parent
• Turn on Nursery Unit using the Volume ON/OFF switch.
• Turn on one or both Parent Units using the Volume ON/OFF switch.
• On one Parent's Unit, press and hold the Push-To-Talk-Parent "A" Button. Parent's Unit is
ready to transmit when green power light blinks once. (If green light does not blink, you will
not transmit to Parent's Unit. Refer to Solving Problems on page 10.)
• Speak into Parent's Unit holding unit 12"-24" from your mouth. Holding unit closer will cause
the sound to be distorted.
• Release button when finished speaking.
NOTE: When one Parent's Unit is transmitting to the other Parent's Unit, neither unit will
receive the Nursery Unit. The receiving Parent's Unit will not be able to transmit to the Nursery
Unit or the other Parent's Unit.
9 906-2-02