Waterpik Pet Wand PRO PPR-252 Guide D'installation Et D'utilisation

Pet Showers
Pet Wand PRO
Installation and User Guide
For more information visit www.pets.waterpik.com
Installation Guide
Outdoor Installation
1
Attach outdoor adapter
to garden hose.
2 3
Screw on
Waterpik™ hose
to outdoor
adapter.
Screw the wand
onto the hose end
with the yellow tag.
DO NOT leave product outside.
User Guide
How to Use the Pet Wand PRO
If Using Indoors:
Diverter Knob
To divert the water to the wand, make sure
the diverter knob is pointing down.
One Handed Operation:
The EasySelect™ allows for a one handed operation
so you can use your other hand on your pet.
How to Use The 2 Spray Settings:
Change from Narrow to Full WaterComb™ Spray by turning
the dial past the pause mode. Modes will change on either
side of pause.
WaterComb™ Spray – High pressure comb-shaped
•
spray that quickly and e ectively rinses dirt and shampoo.
WaterComb™ Spray
Narrow Targeted Spray – Use the EasySelect™ Dial to
•
reduce the water pressure for a targeted gentle spray
that is great for cleaning sensitive areas such as the
face, chest, and underbelly.
Narrow Targeted Spray
Control the flow with EasySelect™ Dial
• Dial clockwise to increase water pressure.
• Dial counterclockwise to decrease water pressure.
• Or keep turning the dial in either direction to pause the
flow for hands free bathing.
Model: PPR-252
Indoor Installation
1
Remove your current
shower head from
the j-pipe.
5
Screw the wand
onto the hose end
with the yellow tag.
* Per showers regulations, the diverter has a flow restrictor to comply for indoor use.
** If your current shower head has a metal connector, you will need to use pipe tape to seal the
shower head onto the diverter.
Pet Wand PRO System Includes:
Outdoor
Adapter
Diverter
2 3
Screw diverter
onto j-pipe in
a clockwise
direction.*
6
Store wand
on the hook
or simply
unscrew hose
from diverter
to remove
from shower
between uses.
Bathing Guide
How to bathe your pet for a more e ective clean
1
Use WaterComb™ Spray to get your dog wet.
How to use WaterComb™ Spray: Start at the neck of your dog and move the
wand down the back contouring the dog's body in one fluid motion.
For best results place the wand against the dog's fur and gently push the water
down the dog's body.
2
Turn EasySelect™ Dial into pause to reduce water to a trickle.
Hang on suction cup and lather with dog shampoo.
A
B
3
Turn EasySelect™ Dial to WaterComb™ Spray for a thorough rinse.
Adjust water flow to desired pressure and WaterComb™ until the shampoo is
fully rinsed from the dog's coat.
8ft Flexible Hose
Suction Cup
4
Screw your
shower head Screw hose onto bottom
onto the diverter.** part of diverter.
Use With A Hand Held Shower
If you have a hand held shower, you can
simply unscrew your shower hose from the
bracket, and screw on the pet wand hose or
screw directly onto j-pipe.
C
Wand