Voltage Converter Installation; Connecting The Inverter - Technaxx TE21 Mode D'emploi

(2) Red Power LED
(3) High speed cooling fan. When the temperature inside the inverter exceeds
a preset limit, the cooling fan automatically turns on to cool the inverter. When
the temperature reduces, the fan turns off.
(5) USB C Port max 12V or max. 3A
(6) USB max. 5V/ 2,4A
Determine Battery Capacity
Battery type and battery size strongly affect the performance. Therefore, you
need to identify the type of loads your inverter will be powering and how much
you will be using them between charges. Once you know how much power
you will be using, you can determine how much battery capacity you need.
Technaxx recommends that you purchase as much battery capacity as
possible.
CAUTION: Risk of inverter damage.
 The inverter must only be connected to a car that has a nominal output of
12V.  Not operate if connected to a 6/24V battery

Voltage converter installation

 in sturdy and even locations,
 on clean, dry and non-flammable surfaces,
 in well ventilated areas.
Please be sure not to cover the vents.

Connecting the inverter

Plug the Car Adapter into your 12V Source
Operation
Before using the power inverter determine your equipment's total watts!
 Do not connect more watt than the Output Power (maximum continuous
watt) of the device ( see technical specifications).
 Determine Total Wattage Required, Watt ratings are usually listed in
equipment manuals or on nameplates. If your equipment is rated in Amp,
multiply that number times AC utility voltage to determine watts.