Gps Hardmount Antenna - Gorgy Timing DCF Mode D'emploi

INTRODUCTION
trimble's hardmount Antenna provides a perma-
nent-mount antenna. housed in a compact, low-pro-
file package, the Hardmount Antenna is well-suited
to mobile positioning applications. the hardmount
Antenna is a miniature patch antenna with a 25 db
preamplifier. The antenna is designed for installation
on vehicles with a 0.75 inch mounting hole. the an-
tenna comes complete with gasket and mounting nut.
May be installed on flat surfaces up to 0.1 inch thick.
USE CONSTRAINTS
the antenna must be located outside and at the top
of the building, so that the skyline be as clear as pos-
sible around it.
Any building or mound more than 5 degrees over the
skyline may eclipse one or several satellites, redu-
cing thereby the antenna performances.
Although the antenna is little disrupted by interfe-
rences of other systems, it is necessary to
avoid the settling directly under a radar.
HARDMOUNT ANTENNA TECHNICAL DATA
Weight: 6.4 oz. (180g)
►
► Dimensions: 2.48 inch dia. x 1.6 inch ht.
(63mm dia. x 40.5 mm ht.)
► Connector: tNc
24
3.

GPS HARDMOUNT ANTENNA

Mounting of the antenna with its square
MDE-ANTENNES-0085V2.5