Paul Mitchell protools express curl GI10NAB20 Guide D'utilisation

INSTRUCTIONS, SAFETY AND WARRANTY GUIDE
Congratulations on the purchase of your Express Curl curling
iron. We hope you enjoy all of its features, benefits and styling
capabilities!
• Please make sure to read this guide thoroughly before use
• Please keep this guide in a handy place for quick reference
• Distributes heat evenly for consistent, long-lasting curls
• Adjustable temperature control; tool quickly heats up
to 430°F
• Dual voltage for worldwide use
• Extra-long cool tip and insulated thumb grip ensure
comfort and total control
• Includes 1 free replacement spring
• Locking temperature dial for safe operation
• Durable safety stand
• Power indicator light
• 9-foot professional length swivel cord
• 1-year warranty from date of purchase
Press the power button
setting, press the temperature dial to allow it to pop out. Turn the
dial to your desired heat setting and push the dial back in to lock it.
The curling iron will reach your selected temperature in
three minutes. Once you have finished curling, press the
power button
intended for professional and consumer use. This iron has a
polarized plug (one blade is wider than the other). As a safety
feature, this plug will fit into a polarized outlet only one way. If
the plug does not fit securely, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
• Make sure hair is completely dry before use.
• Use a comb when styling for best results.
• Take small sections of hair for optimum results.
TEMPERATURE SETTING
280 - 320°F
320 - 380°F
380 - 410°F
410 - 430°F
• Take a section of hair (the smaller the section, the tighter
the curl).
• Clamp the ends of this section in between the barrel and
the clamp holding the barrel vertically. Wrap your hair
around the barrel.
• For fine hair: hold the iron in place for 5 to 8 seconds.
For thick hair: hold the iron in place for 10 – 15 seconds.
• To release the curl, press the thumb grip to release the
ends of your hair. Gently pull the barrel out of the curled
section and then twirl the barrel counterclockwise, until the
curl slips off the top of the barrel.
• Allow curls to cool before combing or brushing.
• Turn the iron off before unplugging it.
FEATURES
OPERATING INSTRUCTIONS
once to turn on. To adjust the heat
to turn off and unplug the tool. This iron is
STYLING TIPS
HAIR TYPE
Fragile, fine, thin hair
Normal, medium hair
Thick, coarse hair
Professional use only