Publicité
User Manual
Introduction
Thank you for purchasing the LINDY Wireless Charging Pad. Fully compatible with the Qi wireless
charging standard the Wireless Charging Pad is designed to be used with the latest Smartphones /
Tablets fitted with a LINDY Wireless Charging Adapter or those featuring integrated Qi Wireless
charging. Using induction charging technology allows your device to be charged more conveniently as
the need to endlessly connect and disconnect cables is removed; simply place your device on top of the
pad to begin charging.
For more information about LINDY Wireless Charging Adapters please visit www.lindy.com
Package Contents
Wireless Charging Pad
Multi-Country Power Supply 5VDC, 1.5A
USB Cable Type A to Micro-B, 1.4m
This manual
Specification
Compatible with Qi Wireless Charging enabled devices
Maximum Power Output: 5VDC 1A*
Status LED
Dimensions: 147 x 80 x 9mm
*Charging rate/Current is determined by the Smartphone, Tablet or Wireless Charging Adapter.
Operation
The following steps describe the connection and operation of the Wireless Charging Pad.
1. Connect the power supply to a mains socket
2. Connect the power supply to the Wireless Charging Pad using the supplied USB cable.
3. Place your Qi Wireless Charging enabled device on to the pad, following the guidelines below.
Note: It is recommended that the battery of your device is positioned to the centre of the
charging pad to provide the best charging performance (except Samsung Galaxy 2, where it
is recommended that the battery is placed over the Status LED).
4. The Charging Pad will beep to confirm that charging has begun and the Status LED will change from
Green to Blue. If the Charging Pad does not beep then please reposition your device until it does.
5. When the Status LED changes back to Green the device is fully charged.
English
Publicité
