Setup - Dell W4200HD Manuel D'utilisation

Setting an Access Code
After you enter the Parental Control menu for the first time, you can set your own four-digit access
code. If for any reason you lose or forget your access code, you can use the default code.
1
In the Parental Control menu, select Change Code.
2
Using the number pad on the remote control, enter a new access code.
3
Select Exit.

Setup

Channel Setup allows you adjust the settings for individual channels and preset the viewable
channels. If you are using the TV (NTSC connector) or the Digital TV (ATSC connector) input
source, you can preset the viewable channels. Go to the Main Menu, select Setup, select Channel
Setup, and then select Channel Search.
If you have a W4200HD TV and you are using the NTSC connector and the ATSC connector, you
need to preset the viewable channels for both the Digital TV and the TV input source.
DVI Settings allows you to change the color space. The default color space is RGB, but if the colors
are not displaying correctly, you can change the setting to YUV.
Sleep Timer allows you to set an increment of time after which the TV automatically turns off.
Select Closed Caption to turn on and off closed captioning and set several other CC options.
If an image appears to be stuck on the TV, select Plasma Conditioning to help eliminate any image
retention. Using the plasma conditioning feature may take several hours. Severe cases of image
retention are known as burn-in, the plasma conditioning feature does not remove burn-in.
Use plasma conditioning only when you experience a problem with image retention. Overuse may
degrade the TV brightness.
DELL CONFIDENTIAL – PRELIMINARY 10/8/04 – FOR PROOF ONLY
FILE LOCATION: C:\Documents and Settings\solinak\Ƈ¦±\OM update\ch4e.fm
Setup allows you to adjust the appearance of the OSD, preset
viewable cable channels, change the language of the OSD (see
"Selecting Your OSD Language" on page 26) and to restore factory
settings.
In the OSD Settings menu, use OSD Hold Time to increase or
decrease the amount of time the OSD appears. The maximum
amount of time is 60 seconds. You can select TV Button Lock to
lock the buttons on the bottom panel. When this option is enabled,
only the power button functions. Hold the volume increase and the
channel increase buttons together for 10 seconds to unlock the
buttons.
Using the On-Screen Display
31