Care And Maintenance; Troubleshooting; Replacement Parts - Classic Accessories PRT-52-087T Mode D'emploi Et D'entretien

CARE AND MAINTENANCE

STORAGE
Store in a clean dry place. Never store a wet cover in an enclosed area as it can develop mildew.
Avoid folding the plastic windows of the cover for long periods.
BOLTS
Check all bolts before each use to see that they are tight. If one or more bolts come loose, failure of cab parts may occur.
WINDOWS
Don't clean the plastic windows when they are dry—you can scratch them.
Hose them with water and rub them with your bare hands. Liquid soap may be used.
During freezing weather an automotive windshield cleaner and a soft cloth will work (don't use your bare hands
with the cleaner).
Fabric areas of the cab may be washed with a rag. Don't use soap as it may remove protective coatings added by the factory.

TROUBLESHOOTING

Problem
Cab front interferes with the
snow thrower controls.
Not enough headroom.

REPLACEMENT PARTS

If parts are missing or if you need replacement parts, please call Classic Accessories customer service at 1-800-854-2315,
8 a.m. - 4 p.m., PST, Monday-Friday. Please refer to the Package Contents List for the parts list.
22640 68th Ave. S.
Kent, WA 98032, USA
www.classicaccessories.com
Email: customerservice@classicaccessories.com
17cH55_20755
Possible Cause
Lower mounting posts [N] are
mounted too low
Lower mounting posts [N] are
mounted too low
Tel: (253) 395-3900
Fax: (253) 395-3991
12
Corrective Action
Adjust the mounting system
Adjust the mounting system
© 2 017