Charging A Mobile Device; Multi-Function Button - Wagan Tech 8321 Guide D'utilisation

CHARGING A MOBILE DEVICE

1. Press and hold multi-function button for 3 seconds until status indicator lights
begin to flash.
2. Plug the charging cable of the mobile electronic into USB port.
3. When the device is fully charged, press and hold multi-function button for 3
seconds, the unit will shut off.
If the status indicator lights flash 3 times and then shut off, the internal battery is
depleted. Please recharge the internal battery.

MULTI-FUNCTION BUTTON

One tap = shows the remaining power of the battery:
Status
Two taps = the LED light will turn on.
Three taps = the LED light will flash.
Four taps = the LED light will flash an SOS signal
Five taps = the LED light will shut off
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
All manuals and user guides at all-guides.com
User's Manual—Read before using this equipment
Current Capacity
100%
>80%
>50%
>20%
<20% please recharge
©2014 Wagan Corporation. All Rights Reserved.
= Light On
= Light Flashing
= Light Off
6