Cleaning And Maintenance - White&Brown R 2203 Mode D'emploi

- Plug on the slide button (10) and tip back the mixer head (8).
- Place the bowl (12) on the body (11).
- At the same time you plug on the slide button (10), tip forward the mixer head (8).
- Place the hand mixer (2) with accessories already setting
(see the part on « setting and using of accessories » ) on the mixer head (8)
fitting in first the front lock gear of beaters (18) into the top hole of the hand mixer (22).
- Then fit the back lock gear of beater (19) into the bottom hole of the hand mixer (23).
- A click should indicate the good setting of the appliance.
- Plug the appliance.
- Plug the switch button M/A (4). The light will shine on the blue screen (5) indicating « 0 ».
- Select the required speed thanks to the speed wheel (6): the appliance starts.
- Use the speed wheel (6) to increase the rotating speed of accessories.
You can choose until 16 speeds: the number indicated on the blue screen informs you
on the speed level.
- Select « 0 » to stop the appliance.
- Unplug the appliance with the switch button M/A (4).
- Unplug after use.
- Plug on the axis button (9) and remove the hand mixer (2) from the tip-up mixer head (8)
- Remove accessories from the power unit by pressing EJECT button (3).
- Plug on the slide button (10) to remove the bowl (12) from the body (11)
- Rinse them under warm water.
CAUTION: Be sure the mixer is unplugged before cleaning. Never remove any accessory when the
appliance is plugged.
• To make the cleaning easier, rinse the hand mixer soon after use.
It may be washed in dishwasher.
• Never immerse power unit nor power cord. Wipe the power unit with a damp soft cloth.
Never use abrasives. Dry thoroughly before using or ranging.
All manuals and user guides at all-guides.com
USING Of RObOt

cLEANING AND MAINtENANcE

11