Empire OLL48FP12S Instructions D'installation Et Mode D'emploi page 14

FIREPLACE FRAMING AND INSTALLATION
10. Lift front of burner assembly and tilt upwards and toward the
back of the fireplace. Retrieve the two supports from inside
the fireplace and place one each side against the front cor-
ners of the cabinet bottom and under the front corners of the
control panel.
11. Install gas and electrical supplies to fireplace. See page 16
for gas supply requirements. For ease of installation, the
gas and electrical supply are located on the valve side of the
fireplace. Both may be relocated to enter the opposite side of
the fireplace.
Page 14
FRAMING & INSTALLATION
PROP SUPPORT
IN FOUR CORNERS
Figure 19
35305-8-0818