Charging A Mobile Device; Power Button - Wagan Tech Charger Dex Guide D'utilisation

CHARGING A MOBILE DEVICE

1. Press power button once, status indicator lights will light up.
2. Plug the charging cable of your mobile device into the unit's USB output
port.
3. When the device is fully charged, press power button once to turn the unit
off.
If the status indicator lights do not illuminate when the power button is pressed,
the internal battery is depleted. Please recharge the internal battery.

POWER BUTTON

One tap = Activates USB output
Two taps = Activates both LED and USB output
A single press of the power button when the device is in either state will turn the
unit off.
HANGING HOOK
180 degrees of rotation allows it to be positioned where you need it. The frame
tucks cleanly into the back of the unit when not in use.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
All manuals and user guides at all-guides.com
User's Manual—Read before using this equipment
©2015 Wagan Corporation. All Rights Reserved.
4