Tips for saving energy
n
Install the appliance in a dry, well
ventilated room, but not in direct
sunlight and not near a heat source
(e.g. radiator, cooker, etc.). If required,
use an insulating plate.
Open and close the door as briefly
n
as possible.
Occasionally clean the rear of the ap
n
pliance with a vacuum cleaner or paint
brush to prevent an increased power
consumption.
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice, even if the appliance is still under
guarantee!
Fault
Floor of the refrigera
tor compartment is
wet.
Possible cause
The condensation
drainage pipe is
blocked Fig. $
.
Operating noises
Normal noises
Humming - refrigerating unit is running.
Bubbling, gurgling or whirring noises -
refrigerant is flowing through the tubing.
Clicking - motor is switching on or off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit
level. Use the height‐adjustable feet
or place something under the feet.
The appliance is not free‐standing
Please move the appliance away from
adjacent units or appliances.
Drawers or storage areas wobble
or stick
Please check the removable parts and,
if required, reinsert them.
Bottles or receptacles are touching
each other
Please move bottles or receptacles away
from each other.
Remedial action
Clean the condensation channel
and outlet
(See "Cleaning the appliance")
en
25