Cleaning & Maintenance - Vava VA-EE004 Mode D'emploi

4. SLEEP/RESET BUTTON
RESET
Sleep Function
-Press to activate sleep mode with only the sleep LED on, and the device will activate low
fan speed mode automatically.
Reset Function
-Press and hold the SLEEP/RESET Button for 3 - 5 seconds to set the Filter Change Reminder.
-When the SLEEP/RESET (Change Filter Indicator) LED blinks, it indicates it's time to
replace the f ilter. Depending on the actual use (environment and hours used), you may
need to replace f ilters more or less frequently.
-After you've changed a new f ilter or you don't want to replace f ilter.
Press and hold this button again for 3 - 5 seconds to reset the reminder,
then the LED will turn off.
5. TIMER BUTTON
1) Press to set the purif ier to operate for intervals of 2 hours, 4 hours and 8 hours,
after which it stops automatically.
2) Press this button to select the required operating time. A corresponding LED will light up.
3) To select the continuous operating mode, press and hold the Timer Button until there is
no indicator lighting up.
Important note:
When the unit is not in use, switch it off and unplug it.
Cleaning & Maintenance
The air purif ier should be cleaned at least once every month. More frequent cleaning may be
required depending on environmental conditions.
Filter
Clean with the brush of your vacuum cleaner to remove lint and dirt.
NOTE:
-Only the Extra Pre-f ilter is washable. And make sure the pre-f ilter is dry when f ix back to the
combination f ilter.
Caution
·Use a clean, dry, soft cloth to wipe the external surface of the unit.
·Do NOT stick any foreign objects or your f ingers inside of the unit.
·Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in the unit while cleaning
as they will damage the product.
·NEVER use alcohol or other solvents.
05/06