Power Saving Feature - AMX SA-132 Guide D'utilisation

Telephone Paging Input
This special input (terminals 1 and 3) will allow you to page in your PA system using your own telephone set. Pin
2 is Ground and Pin 4 is for manual priority switching. Any signal going through Pin 3 with automatically triggers
the priority system without any manual intervention. At the end of the announcement, the system will return to
its normal operation. A Gain control is located next to the input in order to increase incoming volume if
necessary. Final adjustment will be made with the Tel Paging volume control located on front panel.
Recommendations
Keep your amplifier away from excessive humidity, dust or grease. This unit has sensitive components that can
be affected in a difficult environment. If, at one point during its usage, the fuse on the AC line needs to be
changed make sure that the replacement is of the same value. It is important that you try to identify the reason
for this failure. This will most likely prevent further damage to your amplifier. Any service work on this unit
should be performed by a qualified technician.

Power saving feature

Note that this unit will automatically shut-off after a one-minute audio signal interruption.
SA-132 TECHNICAL SPECIFICATIONS
Output in RMS
AC 117v 60Hz
THD at Rated Power
Speaker Outputs
Frequency Response
Microphone Input
AUX Input
CD Input
Telephone Paging Input
Music on Hold Output
Sig/Noise Ratio, Mic
Sig/Noise Ratio, AUX/CD
Tone Controls
Dimensions HxWxD mm
Weight
All manuals and user guides at all-guides.com
130W
4 Amp. Fuse
2.5%
4Ω, 8Ω, 16Ω, 70V, 100V
100Hz – 20KHz
1mV @ 600Ω
200mV @ 50KΩ
500mV @ 50KΩ
100mV – 900mV (bal.)
1W max @ 32Ω
>60dB
>70dB
±10dB
90x430x270mm
10.5kg
SA-132 Instruction Manual – Guide d'utilisation