ROBBE 8511 Instructions D'utilisation page 2

A compact digital battery checker suitable for most commonly used battery types. With integral LCD
screen and voltage display for up to seven battery cells.
Overview:
Cell count indicator
Battery
type
Type
Individual cell
Li battery type
display
select
Connecting NC / NiMH batteries:
Nickel-Cadmium and Nickel-Metal-Hydride batteries fitted with servo plugs or
BEC plugs can be connected directly to the appropriate socket.
Note: the device will not switch on if the battery is connected with reversed po-
larity. The capacity display is not precise if no external load is in circuit. To ob-
tain a realistic value a load resistance (e.g. a filament bulb or similar) should be
wired in parallel; the current drawn should be at least 2/10 of the battery capa-
city.
The buttons are only used with Li batteries
TYPE button:
This button is used to select the Lithium battery type: Li-Po 3.7 V, Li-Ion 3.6 V, Li-Fe 3.3 V.
CELL button:
Press the "CELL" button repeatedly to display the individual cell voltages.
MODE button:
This button is used to display all the details of the Lithium battery connected to the unit, e.g.:
V-TOTAL = total voltage, V MAX-MIN= difference between cells of highest and lowest voltage, V MAX: cell
with highest voltage, V MIN: cell with lowest voltage
Connecting Lithium batteries:
Locate the sensor lead attached to the battery and connect it to the Battery
Checker; the black wire (negative battery pack terminal) must coincide with the
arrow marker.
Note: Thunder Power and Flight Power batteries cannot be connected directly,
as their voltage sensor leads are fitted with different connectors. In this case an
adaptor must be used.
This symbol means that you must dispose of electrical and electronic equipment separa-
tely from the general household waste when it reaches the end of its useful life. Take your
charger to your local waste collection point or recycling centre. This applies to all coun-
tries of the European Union, and to other European countries with a separate waste col-
lection system.
robbe Modellsport GmbH & Co.KG
Metzloser Strasse 36
D-36355 Grebenhain
Telephone: 0049-6644-87-0
Fax: 0049-6644-7412
robbe Form AFAI
Voltage display
Digital Battery Checker No. 8511
Mode
Cell
Voltage
switch indi-
cator
Operating Instructions
Digital Battery Checker
NC / NiMH socket
Charge state
Lithium socket
We accept no liability for errors and technical modifications.
Copyright robbe Modellsport 2008
This document may not be copied or reproduced in whole or in
part without the prior written approval of robbe Modellsport
GmbH & Co. KG
No. 8511
Specification:
- 4 - 7 NC / NiMH cells (NiXX)
- 2 - 7 Lithium cells (LiPo, LiFe,
LiIon)
- Beeper
- LCD screen
- Dimensions: 82 x 50 x 10mm
Mode