Safety Notes - Chauvet Professional XENO 2500 Guide De Référence Rapide

X ™ 2500 QRG
ENO
About this
Guide
Disclaimer

Safety Notes

Contact
What Is
Included
The Xeno™ 2500 Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX values.
Download the User Manual from
details.
The information and specifications contained in this QRG are subject to
change without notice.
DO NOT change lamp while product is plugged into power! Serious
personal injury can occur. See the User Manual for the proper
procedure to change the lamp.
•
DO NOT open this product. It contains no user-serviceable parts.
•
DO NOT look at the light source when the product is on.
•
CAUTION: Flashing light is known to trigger epileptic seizures. User
must comply with local laws regarding notification of strobe use.
•
CAUTION: This product's housing may be hot when lights are
operating.
•
Mount this product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
•
DO NOT leave any flammable material within 50 cm of this product
while operating or connected to power.
•
USE a safety cable when mounting this product overhead.
•
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
•
DO NOT operate this product if the housing, lenses, or cables appear
damaged.
•
DO NOT connect this product to a dimmer or rheostat.
•
ONLY connect this product to a grounded and protected circuit.
•
ONLY use the hanging/mounting bracket to carry this product.
•
In the event of a serious operating problem, stop using immediately.
•
The maximum ambient temperature is 104° F (40° C). Do not operate
this product at higher temperatures.
Outside the U.S., United Kingdom, or Ireland, contact your distributor to
request support or return a product. Visit
contact information.
•
Xeno™ 2500
•
Power Input Cord
•
Safety Cable
www.chauvetlighting.com
•
Warranty Card
•
Quick Reference Guide
2
www.chauvetlighting.com
EN
for more
for