Troubleshooting Guide - Braun KG 7070 Instructions

Troubleshooting Guide

Problem
The appliance does not start
The appliance does not start and
the start/stop is flashing
The appliance does not re-start
and the start/stop button is
fading
It is not possible to adjust the
grinding setting.
Appliance sounds different than
normal
Upper burr cannot be assembled
correctly
Both the design specifications and these user instructions are subject to change without notice.
Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take
place at appropriate collection points provided in your country.
Pontential Cause
Not plugged in
Removable upper burr is not
inserted correctly
Coffee ground container is not
inserted correctly
Lid of coffee ground container is
missing
Overheat protection is activated
to avoid burning of coffee
Thermal protector is activated
The grinding setting was adjus-
ted before the appliance has
been switched on
Coffee ground outlet is blocked
Beans are in the container
Burr is dirty
Solution
Plug in
Insert removable upper burr
correctly
Insert the coffee container
including its lid correctly
Attach lid correctly to the
container
Wait until the fading of the start/
stop button turns off.
Check if overheat protection is ac-
tive. If not wait some time, unplug
and plug in again to restart. If the
appliance does not restart cont-
act our customer service
Only adjust the grinding setting
when grinding process has alrea-
dy been started (at a standstill,
the beans might jam)
Clean coffee ground outlet
Remove the beans
Clean the burr
9