Using The Camera; Installing The Supplied Software - JVC GV-LS2 Guide De L'utilisateur

Using the Camera

Viewing on a Browser
Access "http://192.168.1.100:80" by
Internet Explorer.
If you log in using the user name and
password of the administrator or those
set in "MONITORING SETTINGS" (p.10),
you can watch a video on a browser.
• To watch a video via a network, the
"MONITORING SETTINGS" (p.10) are
required. Entering the user name and
password of our DDNS service allows
you quick access.
To acquire a DDNS service account,
visit our website
https://dd3.jvckenwood.com/user/
<Example of browser>
1
2
3
Tab: Switch the display. (Monitor:
1
Camera image and control panel,
File: Images on the SD card, Status:
Message history)
Control panel: Controls the camera/
2
pantilter.
Message Bar: Displays an error
3
message, etc.
Logout: Click this to log out.
4
Status: Indicates the current status
5
such as the remaining battery power.
Stream settings: Displays the stream
6
settings.
12
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/

Installing the Supplied Software

"JVC CAM Control" allows you to control
multiple cameras, change the angle, etc.
1 Insert the supplied software CD-
ROM into the CD/DVD drive of your
computer.
2 Follow the on-screen instructions
to finish the installation.
4
5
6