Salora CR 612 Mode D'emploi page 21

3. To set alarm mode (radio or buzzer) or disable the alarm function for
ALARM 2, Press AL2 (4) repeatedly until the desired alarm mode
appears on the display. Each time you press AL2 (4), the alarm indication
changes as follows :
4. When the alarm time is reached, the radio or buzzer will sound unless the
alarm function is disabled.
Note:
While volume of buzzer alarm is fixed and cannot be adjusted, the volume,
band and frequency of radio alarm are preset as last tuned. When the radio
alarm sounds, you can also adjust the listening level by VOLUME
(4) buttons. To select the station, refer to "Radio Operation".
Review the Alarm Time
In standby mode, press and hold AL1 (3) button for ALARM 1 or AL2 (4)
button for ALARM 2 for 2 seconds, then the alarm time setting will blink in
the display. Press AL1 (3) (for ALARM 1) or AL2 (4) (for ALARM 2) again
to return to the clock time display.
Snooze Function
When the alarm is sounding, press SNOOZE (10) button to stop the alarm
temporarily. The "AL1/AL2 buzzer indicator (15)/(17) or AL1/AL2 radio
indicator (16)/(18)"will keep blinking while the snooze function is in
operation, and the alarm will sound again after 9 minutes. To stop the
alarm, press POWER (1) button once. The alarm indicator will become
solid and the alarm will function at the same time the next day.
EN
(3) /
4