Operating The Soundbar; Adjusting The Volume - Seiki SB201C Manuel De L'utilisateur

OPERATING THE SOUNDBAR

OPERATING THE SOUNDBAR
Before using the SoundBar to play audio from connected devices, please make the
necessary connections described in this user manual and switch the SoundBar to
the correct source for other devices.
Switching the SoundBar On or to Standby
Press the
the SoundBar on or to standby.
• The LED display will show the selected source, volume, the sound mode etc.
when the SoundBar is switched on.
• The LED display will show "POWER" in red when the SoundBar is in standby
mode.
Note: The
not switch off the SoundBar completely. Please disconnect the AC adapter from the
mains socket if you plan to leave the SoundBar unattended for long periods of time.
Selecting an Input Source
Press the SOURCE button on the SoundBar repeatedly to select the desired input
source between LINE /COAX, or you can select by the remote control directly.
• The LED display will show the selected source.

Adjusting the Volume

Press the VOL+/- buttons on the SoundBar or the VOLUME+/ - buttons on the
remote control to adjust the volume.
• The volume range of this SoundBar is from 0 (Min.) to 30 (Max.).
• The LED display will show "- -"when the volume is zero.
Muting the Sound
Press the MUTE button on the remote control repeatedly to mute or restore the
sound.
• The LED display will show "- -"when the sound is muted.
• You also can restore the sound by pressing the VOL+/- buttons.
Selecting the Sound Mode
Press the MODE button on the SoundBar repeatedly to select the desired sound
mode among Movie/Music/News/Games, or you can select by the remote control
directly.
• The LED display will show the selected sound mode.
10
SEIKI_Soundbar UG-English Original_v2.indd 10
All manuals and user guides at all-guides.com
button on the SoundBar or the
button on the SoundBar or the
button on the remote control to switch
button on the remote control does
2012/8/3 18:58:27