Starting And Shutting Down The Dvr - W Box Technologies 0E-HD4C1TD Mode D'emploi

2. Starting and Shutting Down the DVR

Proper startup and shutdown procedures are crucial to expanding the life of the DVR.
Before you start:
Check that the voltage of the extra power supply is the same as the DVR's requirement and the ground connection is
working properly.
Starting the DVR
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an Uninterruptible Power
Supply (UPS) be used in conjunction with the device.
2. Turn on the power switch on the rear panel, and the Power indicator LED should turn on indicating that the unit
begins to start up.
3. After startup, the Power indicator LED remains on.
Shutting Down the DVR
1. Enter the Shutdown menu.
Menu > Shutdown
2. Select the Shutdown button.
3. Click the Yes button.
4. Turn off the power switch on the rear panel when the note appears.
August 2016
Figure 16 Setting Admin Password — Strong
Figure 17 Device Activated
21