Adding Device - Danfoss Link PR Plug-In Relay Guide D'installation

Installation Guide
Installation

Adding device

Adding Danfoss Link™ PR to a system
is made from the Danfoss Link™ CC
Central Controller .
When adding, press the install
button until the LED gives a
fast green flash .
For further information,
see the Danfoss Link™ CC
instruction manual:
Configuration 6:
Adding devices.
VISGY45X
Danfoss Link™ PR
1 . Connect Danfoss Link™ PR to a
SCHUCKO socket/outlet .
2 . Heating elements connected to
Danfoss Link™ PR have to be self
protective against overheating .
1.
© Danfoss
2.
Max. 1 m
04/2011
GB
7