Publicité
1.
Select one 41302 and one 41307, fix together as shown with the front frame braces; 41303 using
screws (bag 1) and (bag 12).
2.
Repeat for other side of front frame.
ALWAYS ENSURE HOLES TO LOCATE HINGES ARE TOWARD OUTSIDE OF FRONT
FRAME. ENSURE COMPLETED FRAME IS SQUARE
1.
Line up holes on both 41304's as shown (fig 1).
Fix into channel both 41305's with the third hole in from either end lining up (fig 2).
2.
3.
Central to this channel line up 41306.
Fix together at overlaps with screws (bag 1) (fig 3).
4.
Attach front frame posts to both ends in order to complete the front frame assembly.
5.
1.
ASSEMBLER LES PROFILES D'ANGLE 41302 ET 41307 COMME INDIQUE CI-DESSOUS AVEC
LES PROFILES DE FACADE, A L'AIDE DE LA VISSERIE DES POCHETTES NO.1 ET NO.12.
IDEM POUR LE PILIER DE FACADE DROIT.
2.
TOUJOURS S' A SSURER QUE LES TROUS DEVANT RECEVOIR LES GONDS SOILENT SUR LES
PROFILES EXTERIEURS DU PILiER.
1.
SUPERPOSER LES DEUX PROFILES 41304 COMME INDIQUE (FIG 1).
FIXER AU TROISIEME TROU, A L'INTERIEUR DU PROFILE DE FACADE, LES DEUX
2.
PROFILES 41305 (FIG 2).
3.
PLACER LE PROFILE CENTRAL 41306.
VISSER L'ENSEMBLE AVEC LA VISSERIE DE LA POCHETTE NO.1 (FIG 3).
4.
5.
LA FIGURE 3 MONTRE L'ENSEMBLE DE LA STRUCTURE FRONTALE ASSEMBLEE AU
PILIER DE FACADE.
FRONT FRAME POST.
FRONT FRAME.
PROFILE DE PILLER DE FACADE
STRUCTURE FRONTALE
Publicité
