Symbols And Labels - Oregon PS750-091 Manuel D'instructions Original

Élagueur sur perche
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symbols and Labels

These symbols and labels appear on the pole saw and/or in this manual .
SYMBOL NAME
Class II construction
Safety alert symbol
Read instructions
Wear eye, hearing,
and head protection
Wear hand protection
Wear foot protection
Wear Long Pants
Sound power
108
Two-handed hold
One-handed hold
Beware Of Kickback
Do not use a ladder
Do not dispose
Do not expose to rain Do not operate the pole saw in wet conditions.
Cutting tool
Rotating Blade
Damaged cable
Unplug before
maintenance
Trip hazard
Bystander safety
zone
Use care around
electrical lines
10
Symbols and Labels
EXPLANATION
Designated double insulated construction tools
Indicates that the text that follows explains a danger, warning, or
caution.
The original instruction manual contains important safety and
operating information. Read and follow the instructions carefully.
Wear eye protection when operating the pole saw. Wear hearing
protection when operating the pole saw. Wear a hard hat when
using the pole saw.
Wear gloves when operating the pole saw and when handling the
saw chain.
Wear appropriate closed-toe work boots when operating the pole
saw.
Wear long pants when operating the chain saw .
Sound power level is 108 dB.
Hold pole saw with both hands.
Do not hold the pole saw with one hand.
Kickback can cause severe injuries .
Never stand on a ladder when using the pole saw.
Do not throw in household waste. Take to an authorised recycler.
Cutting tool. Do not touch the chain without first deactivating the
pole saw by unplugging it.
Keep hands and feet out of openings while the shredder is
running.
Inspect the power cord regularly for damage. Remove the plug
from the mains immediately if the cable is damaged or cut.
Unplug before performing any maintenance.
Know the location of the cord at all times.
Establish a bystander safety zone of 50 ft (15 m) around the
operator.
Never operate the pole saw near any wires that may be carrying
electric current.
Pole Saw Model PS750-091

Publicité

Table des Matières
loading

Table des Matières