murprotec CTA 2 Mode D'emploi page 40

TABLE OF CONTENTS
1. EQUIPMENT
1.1. High-quality equipment
1.2. Meticulous craftsmanship
1.3. Security devices for each function
2. USE
2.1. Important notices
2.2. Operating principles
3. CONTROL BOX
3.1. Description
3.2. Indicator lights
3.3. Main screen
3.4. Tree structure
4. SETTINGS MENU
4.1. Mode selection menu
4.2. Airflow setting menu
4.3. Temperature setting menu
4.4. Return to factory defaults menu
4.5. Date and Time setting menu
4.6. Language selection menu
4.7. Country selection menu
4.8. Region selection menu
4.9. System setting menu
5. INFORMATION MENUS
6. INFORMATION TEXTS AND ERROR MESSAGES
6.1. Information texts
6.2. Error messages
7. MAINTENANCE OF THE ATU AND FILTER REPLACEMENT
7.1. General
7.2. Filter replacement
8. POWER CUT
9. IN THE EVENT OF A PROBLEM
10. WARRANTY
38
3.2.1. Green light on, red light off
3.2.2. Green and red light on
3.2.3. Red light on and green light off
4.1.1. Automatic
4.1.1.1. The system is in WINTER mode, during the DAYTIME
4.1.1.2. The system is in WINTER mode, during the NIGHT TIME
4.1.1.3. The system is in SUMMER mode, during the DAYTIME
4.1.1.4. The system is in SUMMER mode, during the NIGHT TIME
4.1.1.5. The system is in SUMMER heat wave mode, during the DAYTIME
4.1.1.6. The system is in SUMMER heat wave mode, during the NIGHT TIME
4.1.2. Temporary
4.1.3. Rapid
4.1.4. Absent
4.1.5. Summer
4.1.6. Winter
4.2.1. General airflow
4.2.2. Daytime airflow
4.2.3. Night time airflow
4.2.4. Temporary airflow
4.2.5. Duration
4.3.1. Winter T°
4.3.2. Summer T°
4.3.3. Absence T°
4.3.4. Max air T°.
7.2.1. General
7.2.2. Opening the cover
7.2.3. Removing the old filter and putting in a new one
7.2.4. Calibrating the new filter
pg. 39
pg. 39
pg. 40
pg. 42
pg. 46
pg. 46
pg. 47
pg. 49
pg. 49
pg. 49