Samsung HL-T5076S Guide De L'utilisateur page 70

Zooming-In
1 After switching the mode to WISELINK, select a memory device that you have installed.
(Refer to page 65)
2 Press the ENTER button to select Photo.
JPEG files and existing folders are displayed.
3 Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full screen.
4 Press the INFO button to display the option (Slide Show, Rotate, Zoom).
Press the ▲ or ▼ button to select Zoom, then press the ENTER button.
Each time the ENTER button is pressed, the photo size increases.
(x2 → x4 → x1)
● x2: Zoom-in to the photo x2.
● x4: Zoom-in to the photo x4.
● x1: Restore the photo to its original size.
To move the enlarged photo image up/down/left/right, press the ▲/▼/◄/► buttons.
To exit WISELINK mode, press the WISELINK button on the remote control.
➢ The enlarged file is not saved.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
Zoom function information icon (Displayed at the top left of the screen).
Icon Current OSD
Zoom (x 2)
Zoom (x 4)
Zoom (x 1)
Function
Zoom-in to a photo x2.
Zoom-in to a photo x4.
Restore a photo to its original size.
English - 70