Publicité
Liens rapides
AVS-4601HG
FLAT PANEL AUDIO VIDEO SYSTEM
MEUBLE TV POUR TÉLÉVISEURS
SOPORTE PARA TV
ASSEMBLY INSTRUCTIONS
INSTRUCTIONS D'ASSEMBLAGE
INSTRUCCIONES DE ENSAMBLAJE
Patent pending / Brevet en instance / Patent pendiente
Made in China / Fabriqué en Chine / Hecho en China
Italian designed / De design italien / De diseño italiano
Do not discard these instructions / Ne pas jeter ces instructions / Conserve estas instrucciones
DS-1_120407v1T
Publicité
Manuels Connexes pour Bello AVS-4601HG
Sommaire des Matières pour Bello AVS-4601HG
- Page 1 AVS-4601HG FLAT PANEL AUDIO VIDEO SYSTEM MEUBLE TV POUR TÉLÉVISEURS SOPORTE PARA TV ASSEMBLY INSTRUCTIONS INSTRUCTIONS D’ASSEMBLAGE INSTRUCCIONES DE ENSAMBLAJE Patent pending / Brevet en instance / Patent pendiente Made in China / Fabriqué en Chine / Hecho en China Italian designed / De design italien / De diseño italiano...
- Page 2 PARTS LIST / NOMENCLATURE DES PIÈCES / LISTA DE PIEZAS Quantity Quantity Part / Pièce / Pieza Part / Pièce / Pieza Quantité Quantité Cantidad Cantidad Tools Outillage Herramientas...
- Page 3 FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS: ! ALWAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE ASSEMBLED UNIT. ! BE CAREFUL WHEN MOVING THE ASSEMBLED FURNITURE AFTER THE GLASS SHELF HAS BEEN INSTALLED, AND/OR WHEN THERE IS EQUIPMENT LOCATED ON THE FURNITURE AS THIS MAY CAUSE THE SHELVES AND OTHER ITEMS TO BECOME UNSECURED AND FALL.
- Page 4 ASSEMBLY INSTRUCTIONS INSTRUCTIONS D’ASSEMBLAGE INSTRUCCIONES DE ARMADO NOTE: TWO PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS TABLE / REMARQUE : IL EST CONSEILLÉ D’ TRE À DEUX POUR ASSEMBLER CE MEUBLE NOTA: SE RECOMIENDAN DOS PERSONAS PARA MONTAR ESTA MESA 1. INSERT four adjustable foot pads (N) into the Fig.
- Page 5 Fig. 3 4. ATTACH the bottom shelf support bar (D) to the left side frame (B) and SECURE together using one long screw (J) and the Allen wrench tool. 5. CONNECT the middle shelf support bar (E) as shown in Fig. 3. 4.
- Page 6 Fig. 4 6. ATTACH the right side frame (C) to the CMS ® (Cable Management System) support frame (A) as shown in Fig. 4. SCREW one long screw (J) through the top of the right side frame (C) and into the right side of the top bar of the CMS ®...
- Page 7 Fig. 5 9. INSERT the top shelf support bar (F) down into the open tube ends of the left and right side frames (B & C) as shown. 10. APPLY twelve glass pads (M) where indicated in Fig. 5. PLACE three glass pads (M) on each glass shelf support bar (D, E, &...
- Page 8 Fig. 6 11. SECURE the top shelf support bar (F) by inserting the plastic caps (O) over the tube openings on the left & right side frames (B & C) as shown. 12. APPLY two glass pads (M) to the tops of the plastic caps (O). 11.
- Page 9 Fig. 7 13. ATTACH the top glass shelf (G) by carefully placing it onto the assembled frame, making sure the two silver discs are inserted into the holes in the top bar of the CMS ® frame (A). 14. SECURE the top glass shelf (G) with two small screws (K). BE CAREFUL NOT TO OVERTIGHTEN THE SCREWS.
- Page 10 Fig. 8 15. INSTALL the middle glass shelf (H) and bottom glass shelf (I) as shown. 16. INSERT the plastic T-pin (L) through the hole in the rear of the middle shelf (H) and into the hole in the CMS ®...
- Page 11 To receive replacement or missing part(s) under this warranty, go to our website at www.bello.com or call our Customer Service Department at 1-888-235-7646. Please have the model number and part number(s) for reference. You will also need your sales receipt or other proof of purchase.
-
Page 12: Garantie
Esta garantía le proporciona derechos legales específicos. Usted también puede tener otros derechos, los cuales varían según el estado. BELL'O INTERNATIONAL CORPORATION, 711 Ginesi Drive, Morganville, NJ 07751-1235 Phone: (732) 972-1333 Fax: (732) 536-6482 Web: www.bello.com E-mail: sales@bello.com...