Heartland 5210 Instructions D'installation Et D'utilisation page 7

Steel Washer
-Remember when working with the closet, the closet is top heavy
installation.
-With a helper,lift closet assembly from box by area that is circled.(See Fig.1 Page 2).
-Rest the closet assembly on the carton,while your helper steadies the closet,peel the closet backing off
the gasket and stick one on each bracket.
-Place closet assembly onto stove body.(See diagram above).
Caution: In the case of the Glass cooktop models 8210,6210:
DO NOT REST CLOSET CORNER BRACKETS ON GLASS, to prevent damage to glass top.
-Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the
closet, fasten the closet brackets to the stove top with machine screws .
-To fasten the splashback to the rear of stove, with the Models 5210,6210 use 5 sheet metal
screws and washers. For Models 4210,8210 us e 4 sheet metal screws and washers. To pre-
vent chipping do not overtighten or use power tools.
Sheet metal
screw
Steel washer
Machine screw
Sheet metaI
screw (black)
Bracket
Gasket - Peel off backing
and stick on.
Machine screw
(Nickel Plated)
. Use your hand to support it during
2
Gasket