Quick-Start-Guide - GPS Vision TK5000 Mode D'emploi

GPSvision

3. quick-start-guide

Note: After completing the quick-start guide the tracker is ready to use and you can
check the position by calling it.
Note: If you have a tracking portal access, you may NOT use this command,
because it overrides the portal configuration. To authorize your phone number use
only Step 2 in the Quick Start Guide.
We ask you to read the manual completely once at least to get an
overview of. Then you can use the quick start guide:
1. Disable the PIN code of the SIM card (see 2.1)
2. Insert the SIM card into the Tracker (see 2.1)
3. Insert the battery and charge it (see 2.2)
4. turn the tracker on and wait one minute
5. Send the following SMS with your own mobile phone number to the Tracker:
$WP+COMMTYPE=0000,1,+4917911111
Instead of +4917911111 enter your mobile number including country code!
If everything is correct, you will receive back a confirmation from the tracker via SMS
with $ OK! COMMTYPE = 1, +49 ...... . When you don't get back anything or a $ = ERR
then check again if you have written the command correctly in the SMS.
Note: You can find detailed information in the manual on the CD.
6. Send the following SMS with your own phone number to the Tracker:
$WP+CITRACK=0000,+4917911111,,,,,129
Instead +4917911111 enter your mobile number including country code!
The characters ",,,,, 129" must also be unchanged in the SMS.
If everything is correct, you will receive a confirmation from the Tracker via SMS with
$ OK! CITRACK = 1, +49 ...... . When you don't get back anything or a $ = ERR then
check again if you have written the command correctly in the SMS.
Note: You can find detailed information in the manual on the CD.
7. The tracker is now ready for use.
You can now call the tracker with your mobile number and receive a text message sec-
onds later. You can now enter the coordinates in Google Maps or click on the link directly
(see "QUICK START GUIDE" in the GPS tool)
Manual
EN
9