Worx WX092 Mode D'emploi page 8

10.Before each use, check
the device. If damage
is detected, do not use
the device. Have repairs
performed only by a queried
technician. Never open the
device yourself.
11. The device produces a high
pressure. Do not direct
the air outlet at persons or
animals.
12.Remain alert at all times!
Never use the appliance
when you are distracted or
do not feel well
13.High pressure air could
result in death or serious
injury. Never operate
8
above maximum operating
pressure. Do not operate with
pressure switch or safety
valve set above maximum
allowable working pressure.
14.Inhalation hazard. Using
pump to supply breathing
air could result in death or
serious injury. Do not use
pump to supply breathing
air.
15.The equipment and
packaging material are not
toys. Do not let children
play with plastic bags, foils
or small parts. There is a
danger of swallowing or
suffocating.
20V Multi-Function Inflator
SAFETY WARNING FOR LED
LAMP
WARNING: The LED lamp
equipped with power
tool is in the Exempt Group.
In order to avoid the viewer-
related risk, operator shall be
more careful and read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions may result in
optical injuries.
How to avoid exposure
hazard
With increasing distance from
a lamp the applicable hazard
values decrease - see Figure 1.
At the distance X1, EHV = 1, i.e.
the EHV equals the applicable
emission limit value. Distance X1
is the hazard distance (HD) for
this lamp system. At distance
X2, the optical radiation hazard
value exceeds the applicable
emission limit value by a factor
of A. At this distance, excessive
exposure to optical radiation
may be reduced either by
restricting exposure time by
a factor of A (if the emission
limit values are expressed in
terms of radiant exposure or
time integrated radiance), or
by using engineering controls
(such as filters) which attenuate
EN