Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
a
Quick start guide
Air Cooler
For more information see the extended manual online:
ned.is/cool116cwt
Intended use
The Nedis COOL116CWT is an air cooler with a 5 L water tank
capacity.
The product is not intended for professional use.
This product can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. Children shall not play
with the product. Cleaning and user maintenance shall not be done
by children without supervision.
Any modification of the product may have consequences for safety,
warranty and proper functioning.
Specifications
Product
Article number
Dimensions (l x w x h)
Weight
Power input
Power
Water tank capacity
Air volume
Fan speed
Ionizer function
Automatic air swing
Timer
Remote control
Main parts (image A)
LED display
1
2
Air outlet
3
Water level indicator
Top lid
4
Carrying handle
5
6
Particle filter
Honeycomb filter
7
Water tank
8
9
Drainage
Power cable
q
Swing button
w
e
Cool button
Safety instructions
-
WARNING
• Ensure you have fully read and understood the instructions in this
document before you install or use the product. Keep this
document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective. Replace a
damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for
maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
COOL116CWT
Air Cooler
COOL116CWT
240 x 560 x 260 mm
3800 g
220 - 240 VAC ; 50 / 60 Hz
65 W
5 L
215 m
/h
3
Low / moderate / high
Yes
Yes
1 - 7 h
Yes
Ioniser button
r
t
Timer button
y
Mode button
Fan speed button
u
Power button
i
o
Swing indicator
Cool indicator
p
Ioniser indicator
a
s
Timer indicator
Mode indicator
d
Fan speed indicator
f
g
Ice packs
• Disconnect the product from the power source before service and
when replacing parts.
• Disconnect the product from the power source before removing
the fan guard.
Installation
1. For optimal performance, place the product on a location that
complies with the following:
• Flat and stable surface.
• 50 - 60 cm free space around the product.
2. Close open doors and windows.
If you notice that the humidity level reaches 60% or above,
4
ventilate the room for optimal performance.
3. Plug the power cable A
Filling the water tank
-
Do not fill the water tank above the "max" indicator.
-
Do not use the product if the water level is below the "min"
indicator.
1. Check if the drainage A
2. Open the top lid A
.
4
3. Remove the stopper and fill with water.
Fill until the water level is between "min" and "max" on the
4
water level indicator A
4. Replace the stopper and close A
Using ice packs
The use of ice packs A
4
Fill A
g
with water until the water level is at the "max" indicator.
4
Add A
to A
g
8
if tap water does not provide enough cooling.
4
-
Make sure the water level is between "min" and "max".
Using the product
1. Press A
to switch on the fan.
i
2. Press A
u
to set the fan speed.
A
f
indicates the current fan speed.
3. Press A
i
to switch off the fan.
Using the cooling function
• Press A
e
to activate or deactivate the cooling function.
A
lights up when the function is active.
p
For optimal performance, switch off the cooling function 15
4
minutes before switching off the fan.
Setting air flow direction
• Press A
w
to automatically swing the air flow from left to right.
A
lights up when the function is active.
o
• Use A
2
to set the vertical air flow direction.
Setting the fan mode
• Use A
y
to select the desired fan mode.
A
d
indicates the current fan mode.
The different modes are:
• Standard: the fan blows with the selected fan speed.
• Breeze: the fan speed fluctuates to imitate a natural breeze.
• Sleep: the fan speed decreases by one level every half an hour. It
continues to run at low speed.
Using the timer
When the product is switched on:
• Press A
t
to set the timer.
• Press again to increase the timer up to 7 hours.
The product switches off after the set time has passed.
When the product is switched off:
• Press A
t
to set the timer.
• Press again to increase the timer up to 7 hours.
The product switches on after the set time has passed.
4
q
into a power outlet.
9
is closed.
3
.
4
.
is optional.
g
Publicité
Table des Matières
