Tool Specifications; Intended Use - Wurth Master STP 120-A Notice D'utilisation

STP 120-A.book Seite 13 Freitag, 27. Juli 2007 4:51 16

Tool Specifications

Cordless Jigsaw
Article number
Rated input power
Stroke rate at no load
Stroke
Cutting capacity, max.
– Wood
– Aluminium
– in non-alloy steel
Bevel cuts (left/right)
Weight without battery,
approx.
Battery
Article number
Rated input power
Capacitance
Weight, approx.
Battery charger
Article number
Input voltage
Output voltage
Charging current:
- Rapid charging
- Trickle charging
- Compensating charging
Charging time, approx.
Weight approx.
Protection class

Intended Use

The machine is intended for making separating cuts
and cut-outs in wood, plastic, metal, ceramic plates
and rubber while resting firmly on the workpiece. It
is suitable for straight and curved cuts with mitre
angles to 45°. The saw blade recommendations are
to be observed.
The user is responsible for damage caused by usage
other then intended.
1 Switch for sawdust blowing device
STP 120-A
2 Switch lock for On/Off switch
0700 216 X
3 On/Off switch/speed controller
400 W
4 Saw blade release
0 –3 000 min -1
5 Contact protector
26 mm
6 Saw blade holder
7 Guide roller
130 mm
8 Base plate
25 mm
10 mm 9 Battery unlocking button
0 – 45 °
10 Battery
2,4 kg
11 Lever for base-plate adjustment
12 Switch for pendulum action setting
NIMH 13 Battery-protection cap
0700 905 526
14 Battery-charger port
18 V
15 Charge indicator
2,6 Ah
16 Battery charger
1,0 kg
17 Saw blade
18 Cutting angle scale
19 Sliding shoe for base plate
0700 800
20 Splinter guard
230 V
21 Dust cover for vacuuming
18 V
22 Extraction adapter
23 Circle cutter/parallel guide
2,65 A
Not all of the accessories illustrated or described are included
150 mA
as standard delivery.
63 mA
60 min
0,4 kg
/ II
Removing the Battery
Press both battery unlocking buttons 9 and pull the
battery out of the machine.
Remove the battery-protection cap 13 before using
for the first time.
Rapid Charging
The charging procedure starts as soon as the mains
plug is inserted into the socket outlet and the bat-
tery 10 into the battery-charger port 14.
The rapid-charge procedure is indicated by a flas-
hing charge indicator 15.
Geräteelemente
Charging the Battery
(see figure
The mains voltage and the data on the type plate
must agree.
)
A
13