Updating Firmware - Eldes EWKB5 Guide D'installation

+
+
+

UPDATING FIRMWARE

1. Power up EWKB5.
2. Make sure SD card in use is formatted as FAT32 volume, extFAT and other formats
are not supported. Recommended SD card size up to 128GB.
3. Create a new folder named "firmware" on your microSD card (NO capital letters in
the folder's name).
4. The ultimate file path should be as follows:
X:\firmware\EKB5W*******.bin, where "X" is your SD card drive letter; EKB5W*******.
bin is the correct file name format, where "*" - any preferred symbols. File name length
- up to 12 symbols in total.
5. Insert the microSD card into the card slot of EWKB5. Watch the on-screen progress
and wait until it is complete.
6. Firmware updated.
-
-
-
8 EN
- -
- -
- -
+
+
+
ELDES WIRELESS TOUCHPAD EWKB5 V1.1
+
+
+