B-Speech Rx2 Manuel D'utilisation page 6

GB
Charging
1. Connect the cable charger mini USB plug to the mini
USB input of the B-Speech
2. Connect the USB plug on the other end of the cable
charger to the USB input of your PC or laptop. The LED
lights up during charging.
3. When charging is done, the LED will go off.
4. Remove the cable charger
Pairing
Pairing the B-Speech
"Pairing" means establishing a wireless connection between
the Bluetooth
To be able to use B-Speech
need to pair them.
After pairing, you can use B-Speech
Bluetooth Audio source.
®
The pairing process in detail
1. Before pairing, please check that both devices are fully
charged.
2. Ensure that there is no other active Bluetooth
around.
3. Turn the RX2 ON by pressing the On / Off button for 7
Seconds. The red/blue LED will flash alternately,
® RX2 with Bluetooth
® audio source and the B-Speech
RX2.
®
RX2 with a audio source, you
®
RX2 with your
®
- 6 -
® Audio source
® RX2.
® device