Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- English -
Removing/cleaning the pump
Prerequisite: The tank is open.
1. Unscrew the plug connection and pull apart.
○ Protect the open plug connection from moisture.
2. Unscrew the Storz coupling type C.
3. Turn the adapter away to the side.
4. Remove the transport protection.
5. Carefully bend open the retaining brace with the tab to release.
6. Remove the discharge pump and clean or replace if defective.
7. Cleaning the discharge pump:
○ Undo the screws on the pump casing and remove the
protection grid.
○ Clean the protection grid and pump casing on the inside and
outside with clear water and a soft brush.
○ Remove soiling from the impeller unit, turning the impeller unit
by hand to access all soiled points.
8. Reassemble the parts in the reverse order.
○ The transport protection only needs to be fitted for shipping or
horizontal transport of the unit.
Wear parts
The following components are wear parts and are excluded from the warranty:
Foam filter, Debris collection bag, Seals, Wheels, Non-return valve, and the Impeller unit
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
10
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
11
Publicité
Table des Matières
