Package Contents; English - Asus FX EHD-A1T Guide Rapide

Package Contents

External Hard Drive
Set up your ASUS FX HDD
1. Connect one end of the bundled cable to your external hard drive's USB port.
2. Connect the other end of the bundled cable to your computer's USB port.
3. After ASUS FX HDD has successfully connected to your computer, the Aura
LED will light up in the preset lighting mode. The system automatically
detects and installs the drivers required by ASUS FX HDD, and displays a
new disk icon and code to represent your ASUS FX HDD.
NOTES
• To ensure the high transfer rate of USB 3.1 Gen 1, make sure that you have
connected your external hard drive to your computer's USB 3.1 Gen 1 port.
• For the best power efficiency, ensure that you have connected your external
hard drive to your computer using the bundled USB 3.1 Gen 1 cable.
• If you want to change the preset lighting mode or synchronize lighting effects
with other Aura-enabled devices, install the Aura program. The latest version
of the Aura program is available at https://www.asus.com/support/.
• To back up your data, install the NTI Backup Now EZ program.
• The Aura program and the NTI Backup Now EZ program are only available
on Windows
Q14714_External_HDD(EHD-A1T_EHD_A2T)_booklet_QSG.indd 7
ASUS FX
operating systems.
®
USB 3.1 Gen 1
cable

English

Quick Start Manual
10/29/2018 2:54:03 PM
7