Appliance Description; Before First Use; Preheat - Inventum GR802 Mode D'emploi

2

appliance description

1. Grill plate
2. Base
3. Thermostat button
4. Control light
5. Pan with non­stick coating ­ 8 pieces
6. Heating element
3
before the first use
Before you use the appliance for the first time, please do as follows: Carefully unpack the appliance and the separate parts, such as
the grill plate and the pans (8 pieces) and remove all the packaging material. Keep the material (plastic bags and cardboard) out of
reach of children. Check the appliance after unpacking for any damage, possible from transportation.
Place the appliance on a heat resistant flat and stable surface.
Clean the base of the appliance with only a damp cloth and dry it with a dry cloth. Clean the grill plate and pans with soapy water. Rinse
the parts and dry thoroughly. The grill plate and the pans are dishwasher safe.
Place the grill plate on the supports of the heating element.
Place the pans under the grill plate on the appliance. Lightly grease the grill plate and the pans with a bit of oil for the first use and
remove the excess oil with a piece of kitchen towel.
4

preheat

Before plugging into a socket, check that the voltage in your home corresponds with voltage printed on the appliance. Make sure no
one can trip over the power cord or the extension cord.
The thermostat button is adjustable: MIN
up. As soon as the appliance has reached the set temperature the control light will go out.
Preheat the appliance during 10 minutes. After preheating the appliance is ready to use.
Attention: The thermostat will switch on and off as the thermostat in the appliance maintains the correct temperature.
Preheat the appliance during 10 minutes. After preheating the appliance is ready to use.
The minimum temperature is 80°C and the maximum temperature is 230°C.
6
MAX. Turn the thermostat button to the desired setting. The control light will light
1
2
3
4
5
11
English •