Connecting To A Computer - essentiel b SMART TAB 8 32Go 4G Notice D'utilisation

logging on to a wireless network
The tablet is equipped with a WiFi network system that allows you to connect to the Internet if you have a wireless access
point. Thereafter, each time the tablet detects a network you have already configured, it will connect to it automatically.
Press on Settings > Network and Internet > WiFi.
1.
Press on the switch to turn the WiFi on or off.
2.
Once the WiFi has been turned on, detailed information about the WiFi networks detected displays.
3.
Select the WiFi network to which you want to connect. The network you have selected is secured, and you need to
4.
enter a password or some other login information (contact your network administrator if you need more information). Once
completed, press on Connect.
Comments:
The list of available networks is updated continually. If the network you want to connect to still does not appear when the
•
WiFi is on, you can add new WiFi networks as desired.
Then press on Settings > Network and Internet.
1.
Press on WiFi, scroll to the bottom of the screen and press on Add a network.
2.
Indicate the name of the network and any other information required.
3.
Press on SAVE.
4.
The range and quality of the signal depend on the environment in which you are situated. Physical obstacles and
•
electromagnetic interference from nearby electrical devices may affect the range and quality of the WiFi signal.
If you no longer wish to connect to a network automatically, or if it is no longer in use:
•
If necessary, turn on the WiFi network.
1.
On the WiFi screen, do a long press on the saved network name.
2.
Press on REMOVE in the dialogue box that appears.
3.
26

connecting to a computer

Using the USB cable, you can transfer multimedia files and other types of files between the internal memory of your tablet
and a computer.
Plug the USB-C socket into the USB-C port of the tablet and then plug the USB socket
1.
on your computer.
COMPUTER
SWITCHED ON
If the tablet is not switched on, you need to switch it on by pressing the On/Off Button.
2.
Windows detects the tablet and automatically installs the new material. Once the installation has completed, another
3.
information bubble tells you that your device is ready for use. Your tablet is recognised as a multimedia accessory.
You will receive notification on your tablet that the USB cable has been connected. Open the notification window and
4.
select one of the four different modes below:
- Recharge this device
- Transfer files
- Transfer photos (PTP)
- Use device as a MIDI device
Once all of the file transfers have been completed, close any programme that may be using the tablet. Then click on the
safely remove accessory icon in the task bar next to the clock. Now you can safely pull out the USB cable.
into a free USB port
27