Caution - Braun BLACK400phone Manuel D'instruction

4.3 File Numbering ........................................................................................... 22
4.4 Firmware Upgrade ...................................................................................... 22
Appendix: Technical Specifications .................................................................... 24

1. Caution

1) Do not drop, knock or shake the camera.
2) The working voltage of the camera is 7.5 to 9.0 V. The camera is supplied by
rechargeable lithium battery.
3) Remove battery from camera if camera is not be used for some time.
4) Only use the supplied power supply, as otherwise danger of fire and
electrocution.
5) Please unlock the write-protect before inserting the SD-card.
6) Please insert the SD-card when the power switch is at OFF position before
testing the camera.
7) Please do not insert or take out the SD-card when the power switch is at ON
position.
8) It is recommended to format the SD-card by the camera when used at the first
time.
9) The camera will be in USB mode when connected to an USB port of a
computer. In this case, the SD-card functions as a removable disk.
10) Please ensure sufficient power when having firmware upgrade, otherwise the
upgrade process could be interrupted incorrectly. If any fault occurs after
improper upgrading process, the camera may stop function properly.
11) Damage to the electronics, housing and display caused by external
influences, such as heavy jerks, electric shocks, having fallen or others aren't
covered by the warranty.
12) As communication networks may vary reasons we can't guarantee 100%
sending and receiving MMS.
13) Don't dismantle or repair the camera. If repair is required, ask an expert or
technical service centre.
14) Keep the camera out of reach of children.
3