Braun Champion 360 Manuel D'utilisation page 21

Quick start guide
1. Install SD card:
Insert the Micro SD card you prepared into the
slot as indicated on the right.
Important:
A high-speed Micro SD card between Class 6 ~ Class 10 must be
used, or else this product may not function normally.
Always turn off the camera before inserting or removing the card.
2. Power on/off
Power on: Press and hold the Power button for about 2 seconds until it
beeps, then release. The display screen will light up, as shown below,
indicating the device is ready (the default mode after power on is
Shooting mode).
Important:
If power on fails, charge the camera first, and see whether the
blue indicator lights up during charging. If so, this indicates the
product is being charged.
Power off: After usage, press and hold the Power button for about 3
seconds and release. The display will show a "GOODBYE" message
and turn off. If there are no operations for 3 minutes under Power save
mode (default), the camera will automatically power off.
4