Cleaning The Removable Front Wheel; Replacing The Battery - shark ION ROBOT RV750C Instructions

MAINTAINING YOUR SHARK ION ROBOT™ - cont'd.
CAUTION: Turn off power
before performing any
maintenance.

CLEANING THE REMOVABLE FRONT WHEEL

The front caster wheel on your robot is equipped with sensitive
sensors and requires cleaning to maintain optimal function.
Frequently check the front wheel for any tangled hair or
wrapped debris. It's important that this wheel can rotate and
spin freely.
1 To clean, pull the wheel from the robot housing.
2 Remove debris that may have built up around the shaft and
in the wheel cavity.
3 Wipe the sensors located in the cavity clean with a clean,
dry towel.
4 Remove any debris built up on the axel of the black and
white sensor wheel, you can pop this wheel off for easy
cleaning.
5 Reattach the black and white sensor wheel and reinsert the
caster assembly before use.
19
1-800-798-7398

REPLACING THE BATTERY

To remove the battery, turn the unit over and
unscrew the battery cover with a Phillips-head
screwdriver. Unplug the old battery from its
connector, then plug in the new battery. Replace
battery cover and screw it back into place.
Replacement batteries can be purchased at
sharkaccessories.com
20
s h a r kc l e a n . c o m