Installation; Making The Electrical Connections - HAMPTON BAY JBO1691A-5/BLK Guide D'utilisation Et D'entretien

Installation

Attaching the cross bar to
the outlet box
□
Screw the mounting screws (DD) into the cross
bar (AA).
□
Mount the cross bar (AA) to the outlet box (not
included) using the outlet box screws (CC).
□
Make sure the threads of the mounting screws
(DD) are facing out when the cross bar (AA) is
attached to the outlet box.
Making the electrical
2 2
connections
□
Wrap the ground wire from the fixture
around the ground screw (BB) on the
cross bar (AA).
□
Use a wire connector (EE) to connect the
ground wire from the fixture to the ground
wire from the outlet box.
□
Use a wire connector (EE) to connect the
white wire from the fixture to the white
wire (neutral wire) from the outlet box.
□
Use a wire connector (EE) to connect the
black wire from the fixture to the black
wire (live wire) from the outlet box.
□
Wrap the three wire connections with
electrical tape for a more secure
connection.
□
Position the wires back inside the outlet
box.
5
Please contact 1-855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM