Bottom Panel Of The Soundbar - Samsung HW-T400 Manuel

Masquer les pouces Voir aussi pour HW-T400:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

You can activate your Bluetooth connection by placing your phone in the NFC detection area
NFC

Logo
of the Soundbar.
Selects the source input mode. (D.IN / Bluetooth / AUX / USB)

Source

Bottom Panel of the Soundbar

POWER


POWER
Connect the Soundbar's AC power cord.

AUX
Connect to the Analogue output of an external device.

D.IN
Connect to the digital (optical) output of an external device.

USB
Connect a USB device here to play music files on the USB device through the Soundbar.
• When you plug in the AC cord, the power button will begin working in 4 to 6 seconds.
• When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.
• If you want to enjoy sound only from the Soundbar, you must turn off the TV's speakers in the Audio
Setup menu of your TV. Refer to the owner's manual supplied with your TV.
• When disconnecting the power cord from a wall outlet, pull the plug. Do not pull the cable.
• Do not connect this unit or other components to an AC outlet until all connections between
components are complete.
• To turn on "Bluetooth pairing" mode, change the source to "Bluetooth" mode and then
press and hold the
Bottom of the Soundbar
button for more than 5 seconds.
AUX IN
DIGITAL AUDIO IN
POWER
AUX IN
(OPTICAL)
DIGITAL AUDIO IN
POWER
(OPTICAL)
USB (5V 0.5A)
USB (5V 0.5A)
ENG - 8
AUX IN

DIGITAL AUDIO IN

(OPTICAL)
USB (5V 0.5A)


Publicité

Table des Matières
loading

Table des Matières