hestan AGB121-NG Mode D'emploi page 18

GAS CONNECTIONS
GAS CONNECTION - NATURAL GAS (NG)
NOTE: To ensure proper heating performance of this appliance, verify that the gas line supply
pressure is adequate (7.0" WC supply pressure is preferred) to maintain 4.0" WC manifold
EN
pressure. Use a minimum 1/2" ID flex hose to prevent gas starvation. Ensure that the service
pipe supplying the side burner is fitted with a shut-off valve conveniently positioned and easily
accessible as an emergency gas shut-off.
Your Hestan side burner for use with Natural Gas is supplied with its own regulator which MUST
NOT be removed. If this regulator needs to be replaced, use only the type specified by Hestan
for this appliance.
To connect the regulator / hose assembly follow the next steps:
1. Locate the regulator mounted underneath your side burner.
2. Connect gas supply using a minimum 1/2" diameter flexible (semi–rigid) stainless steel gas
hose, no more than 48" in length. If you plan to inter-connect the side burner with your
Hestan Grill, be sure to use the included fittings and a flexible hose as short as possible to
make the connection. The hose as well as the connectors must comply with the Standard for
Connectors for Outdoor Gas Appliances and Manufactured Homes, ANSI Z21.75 • CAS 6.27 ,
and suitable for outdoor installation. Use the appropriate thread sealant on all connections.
3. Proceed to LEAK TESTING section.
16
©2016 Hestan Commercial Corporation
(continued)