Table des Matières

Publicité

Dehumidification

1.
Select the dehumidification
mode
by pressing the
mode button.
28
When set to this mode, the appliance reduces the
humidity in the room in which it is installed by
extracting condensed water from the air.
It rids closed spaces of humidity thereby preventing
the formation of condensation on walls, helping
clothes dry more quickly and lengthening the lives
of furniture and instruments.
To dehumidify a room, proceed as follows:
2.
Set the speed required by
pressing the speed button:
Maximum.
Minimum or silent.
Automatic. The
appliance selects
optimum speed
depending on room
conditions.
Important!
The screen displays the current level of
humidity in the air. Press either
check the programmed humidity setting. The
screen lights up and the humidity setting
flashes for a few seconds before displaying
current humidity once again.
The appliance turns itself off automatically
when the programmed humidity level is
reached and turns itself back on again upon
registering a 5% alteration in the humidity
level. Do not therefore worry if the appliance
appears not to be working at certain
moments during operation.
See all the information provided regarding
the emptying of dehumidification water in
Cleaning and Maintenance.
In order to reduce any noise and/or vibration,
place a mat beneath the appliance and
eliminate/reduce unevenness on the floor.
3.
Select the desired humidity
+
level using
and
appliance records the last
entry selected.
Important!
Your appliance is capable
of regulating humidity to
between 30% and 80%.
Recommended humidity for
a comfortable atmosphere,
however, is between 40%
and 60%.
+
or
, The
to

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pad 16001Pad 20001

Table des Matières