Warning Label - DOREL Living TWIN LOFT BED DA8377 Mode D'emploi

TWIN LOFT BED
DA8377 / DA8377-E / DA8377-BL / DA8377-BK / DA8377-GR
STEP 1
One of the headboard top crosses (D) has a label on it, use it in this step.
Insert wood dowels (6) into the ends of headboard top cross (D), headboard bottom cross (F) and
headboard center cross (E).
Attach hardboard crosses (D, F, E) to posts (A) & (B) using wood joint connectors (3) as shown below.
Use the Allen key (7) to tighten the wood joint connectors.
Repeat the previous step to assemble the other headboard using the bottom posts (C) and (A).
NOTE: Pull the headboard crosses (D, F, E) closer together or further apart in order to allow the wood
dowels (6) to align with the holes on posts (A) and (B).

Warning label